Custom adhesion levels
A120 medium adhesion is the listed reference grade; other adhesion levels can be customised. Match the grade to the actual surface and intended removal time through a sample trial.
06 · Tier 2 · General protection
Blue adhesive PE film for temporary surface protection. Custom widths, lengths and adhesion levels for stainless steel, appliance panels and other compatible smooth surfaces.
Product & application imageProduct & application images


Blue PE film guide
Stacked layers give the roll a deep cobalt-blue colour with a slight violet cast. Unrolled film is cyan-blue and translucent. Fine winding lines and subtle irregular reflections are normal visual details of the reference material, rather than a fabric pattern.
These images were generated from the supplied photographs and approved for appearance. They illustrate the product, not measured transparency, adhesion or performance. Confirm the final colour and feel with a physical sample.
Blue PE film guide
Stainless-steel sheets and smooth metal panels: temporary coverage during storage, assembly and handling. Match adhesion separately to brushed, polished or coated finishes; remove grit before application.
Appliance panels and fabricated components: apply before handling or assembly where surface contact is expected. Glass, acrylic, painted and plastic surfaces require a separate compatibility trial; suitability is not assumed from their appearance.
This is an adhesive surface-protection film. It does not replace pallet stretch wrap, cushioning or impact protection. Confirm any cutting, forming, heating or outdoor exposure process before selection.
Blue PE film guide
1. Clean and dry the surface; remove oil, dust and loose particles. Test a small piece using the intended grade and planned dwell time, checking both adhesion and removal.
2. Align one edge, feed the film without excessive stretching and press progressively from the centre outward with a clean, soft applicator. Avoid trapped particles, large bubbles and folds; inspect edges after application.
3. Remove before the agreed service period ends. Peel slowly and evenly with the film folded back close to the surface. If removal becomes difficult or the surface changes, stop and review conditions with TDH.
Blue PE film guide
Send the substrate and finish, a surface photo or sample, required width × length, thickness, preferred adhesion or current sample, quantity and destination. Dimensions and adhesion are customisable; confirm the exact range and order terms with TDH.
Also state indoor or outdoor exposure, expected removal time and any processing or packaging requirements. If the grade is unknown, describe the task rather than guessing a number; a sample trial can guide selection. Free samples are available with freight paid by the customer.
Product framework
Wound blue PE appears deeper in colour; a single layer is lighter and translucent, with a smooth, flexible surface. Images are product and application illustrations, not customer cases. Wide-sheet views illustrate custom widths; the listed standard remains 50 mm × 200 m. Confirm colour, adhesion and removal on a physical sample before ordering.
Performance
A120 medium adhesion is the listed reference grade; other adhesion levels can be customised. Match the grade to the actual surface and intended removal time through a sample trial.
Select 50 or 60 μm to suit handling and processing conditions. Apply to a clean, dry surface with even pressure and avoid trapping dust or air.
Specify the coverage width, roll length and application method. Wide-sheet images illustrate custom formats; 50 mm × 200 m remains the reference size, not the only available size.
Suitable for
Quote checklist
Share the details below so we can match the film, confirm production feasibility and prepare a useful quotation.
TDH · PROJECT SUPPORT